tmq@tmq.com.au    61 7 3640 5600

HRO Seafari Quest

hro seafari quest hro logo
  • Fully automatic operation, low power consumption.

Features


Main Features

THE LOW POWER CONSUMPTION CHOICE

The Seafari Quest is the choice for small sail or power boats with limited power options. It's fully automatic operation and intuitive control system provides optimal fresh water flush features, ideal safety alarms, and easy maintenance access.

features1.jpg

GET MORE OUT OF MINIMAL POWER

  • Energy recovery device - recovers up to 13% of power on all models.
  • Works with DC power.
  • Fully Automatic Operation.
  • Available in compact and modular configurations that easily adapt to your engine room space.

features2.jpg

Intuitive Controls, Smooth operation

  • Extremely quiet, smooth, and with complete vibration isolation.
  • Both compact and modular configurations have the option for remote control to operate system.
  • Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional).

Specifications & Models


Configuration

SEAFARI QUEST - SPECIFICATIONS
Vane Pump - Electrical


  • Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
  • Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
  • Product Water Temperature: Ambient to feed water temperature.
  • Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
  • Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
  • Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
  • System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
  • Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
  • Chlorine Tolerance: 0.1 ppm
  • pH Range: 3-11 (typical seawater pH is 8)
  • System Pressure:
    Feed Water
    Minimum: 6 psi / .41 bar / .42 Kg/cm2
    Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
    System Operation
    Seawater @ 35,000 ppm & 77° F / 25° C
    Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
  • External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
    Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
    Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
    Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)

Seafari Quest - Specifications

Model Production/24HRS Weight SUC 12V SUC 24V MOTOR HP 12/24V
Quest 200 8 Gal / 32 Lit 115 lbs / 52kg 54 27 0.3
Quest 400 17 Gal / 63 Lit 120 lbs / 54kg 60 42 0.3
Quest 600 25 Gal / 95 Lit 125 lbs / 57kg 99 55 0.5



Vane Pump - Electrical

MODEL FEED FLOW - GPM PRODUCT - GPD NORMAL AMP DRAW 12V NORMAL AMP DRAW 24V
Quest 200 1.7 200 21 10.5
Quest 400 2.3 400 26 13
Quest 600 3.2 600 38 20

Dimensions


Compact Dimensions

Compact Dimensions

Quest Compact Model (Profile & Front View)
Quest Compact Model (Profile & Front View)
Sea Strainer
Sea Strainer
Dual Pre/Post Filter
Dual Pre/Post Filter
Optional Add-ons - Booster Pump Assembly and Fresh Water Flush
Optional Add-ons - Booster Pump Assembly and Fresh Water Flush

Modular Dimensions

Modular Dimensions

Modular Control Panel & Membrane Assembly
Modular Control Panel & Membrane Assembly
R.O. Boost
R.O. Boost
Feed Pump
Feed Pump
Dual Pre/Post Filter
Dual Pre/Post Filter

Accessories & Consumables


Fresh Water Flush Remote Control Unit Plankton Filter Assembly Charcoal Filter Assembly
Fresh Water Flush Remote Control Unit Plankton Filter Assembly Charcoal Filter Assembly
Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply.
pH Neutralizing Filter Sea Strainer U.V. Sterilizer
pH Neutralizing Filter Sea Strainer U.V. Sterilizer
Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life.
Fresh Water Flush Remote Control Unit
Fresh Water Flush Remote Control Unit
Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable.
Plankton Filter Assembly Charcoal Filter Assembly
Plankton Filter Assembly Charcoal Filter Assembly
The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply.
pH Neutralizing Filter Sea Strainer
pH Neutralizing Filter Sea Strainer
Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable.
U.V. Sterilizer Soft Motor Start
U.V. Sterilizer Soft Motor Start
The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply.
Planned Maintenance Kit Replacement Filters
Planned Maintenance Kit Replacement Filters
Each Planned Maintenance Kit contains all the spare parts a cruising vessel is likely to need for basic planned maintenance. This includes all necessary pre-filter elements, screens, cleaning compound kits, pump and crankcase oil, replacement seals for the pre-filter, and a storage compound kit. Horizon Reverse Osmosis stocks a full line of high quality standard and commercial filter cartridges to maintain both the pre and post treatment stages, as well as carbon, plankton, monel screen, and oil water separation replacement filters to guarantee system performance.

Downloads


HRO Seafari Mini Downloads

  HRO Systems Brochure

Support


Benefit from over 40 years of local product support. TMQ equipment is backed with a 2 year warranty*. Warranty is extended to 3 years when the item is registered with TMQ.

Contact Us