450 - 1800 Gal/day | 1705 - 6815 Lit/day
Available in compact and modular design configuration.
Easy to use, easy to install and requires minimal maintenance.
Features
Main Features
Space Efficient Design
- Available in compact or modular configuration that allows flexibility for those who have space restrictions
- Space efficient design (5 inches smaller than the original Seafari SFC).
- No installation restrictions. Access membranes from both sides for easy maintenance and installation options.
Intuitive Controls, Smooth operation
- Extremely quiet, smooth, and with complete vibration isolation.
- Both compact and modular configurations allow remote access to system controls.
- Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional)
quality parts - Easy maintenance
- Remote Mount Cube - for easy access to system controls.
- Equiped with a failsafe Product Water Diversion Valve allows only safe drinking water to enter storage tanks.
- High rejection, high yield, commercial grade, and chemical resistant Membranes.
Specifications & Models
Configuration
- Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
- Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
- Product Water Temperature: Ambient to feed water temperature.
- Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
- Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
- Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
- System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
- Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
- Chlorine Tolerance: 0.1 ppm
- pH Range: 3-11 (typical seawater pH is 8)
- System Pressure:
Feed Water
Minimum: 6 psi / .41 bar / .42 Kg/cm2
Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
System Operation
Seawater @ 35,000 ppm & 77° F / 25° C
Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm) - External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)
| Model | Production/HR | Production/24HRS | Weight |
|---|---|---|---|
| SFC 450-1 | 19 Gal / 71 Lit | 450 Gal / 1,703 Lit | 118 lbs / 54 kg |
| SFC 700-1 | 29 Gal / 110 Lit | 700 Gal / 2,650 Lit | 125 lbs / 57 kg |
| SFC 900-1 | 38 Gal / 142 Lit | 900 Gal / 3,407 Lit | 136 lbs / 62 kg |
| SFC 900-2 | 38 Gal / 142 Lit | 900 Gal / 3,407 Lit | 136 lbs / 62 kg |
| SFC 1400-2 | 58 Gal / 221 Lit | 1400 Gal / 5,300 Lit | 147 lbs / 67 kg |
| SFC 1800-2 | 75 Gal / 284 Lit | 1800 Gal / 6,814 Lit | 150 lbs / 68 kg |
| PHASE | HZ | VOLTAGE | HP | RUNNING AMPS | START UP AMPS |
|---|---|---|---|---|---|
| 1 | 50/60 | 115 | 2.5 | 30 | 103 |
| 1 | 50/60 | 220 | 2.5 | 15 | 52 |
| 3 | 50/60 | 220 | 3 | 12 | 30 |
| 3 | 50/60 | 440 | 3 | 6 | 15 |
Dimensions
Self Contained Dimensions
| Self Contained (Front View) |
 |
| Self Contained (Profile View) & Booster Pump |
 |
Modular Dimensions
| Modular Membrane Assembly |
 |
| Modular Control Panel and Gauges |
 |
| Versatile Pumps |
 |
Accessories & Consumables
| Fresh Water Flush | Remote Control Unit | Plankton Filter Assembly | Charcoal Filter Assembly |
|
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. | The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. | Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. |
| pH Neutralizing Filter | Sea Strainer | U.V. Sterilizer | Soft Motor Start |
|
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. | The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. | Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. |
| Fresh Water Flush | Remote Control Unit |
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. |
| Plankton Filter Assembly | Charcoal Filter Assembly |
|
|
|
| The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. | Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. |
| pH Neutralizing Filter | Sea Strainer |
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. |
| U.V. Sterilizer | Soft Motor Start |
|
|
|
| The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. | Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. |
| Planned Maintenance Kit | Replacement Filters |
|
|
| Each Planned Maintenance Kit contains all the spare parts a cruising vessel is likely to need for basic planned maintenance. This includes all necessary pre-filter elements, screens, cleaning compound kits, pump and crankcase oil, replacement seals for the pre-filter, and a storage compound kit. | Horizon Reverse Osmosis stocks a full line of high quality standard and commercial filter cartridges to maintain both the pre and post treatment stages, as well as carbon, plankton, monel screen, and oil water separation replacement filters to guarantee system performance. |
Downloads
HRO Seafari Versatile Downloads
Seafari Versatile Spec SheetHRO Systems Brochure
Support
Benefit from over 40 years of local product support. TMQ equipment is backed with a 2 year warranty*. Warranty is extended to 3 years when the item is registered with TMQ.